Monday, May 6, 2013

SESSION PLAN


SESSION PLAN

Sector                            :         ELECTRONICS
Qualification Title        :          CONSUMER ELECTRONICS SERVICING NC-2
Unit of Competency     :          Maintain and Repair Audio/ Video Products and Systems
Module Title                  :          Maintaining and Repairing Audio/ Video Products and Systems   
Learning Outcomes:
LO1.   Enumerate, explain and apply OHS policies and procedures in maintaining and repairing audio/video products and systems
LO2.    Identify and explain the uses/functions of different types of tools and testing instruments for maintaining and repairing audio/video products and systems
LO3.    Identify and explain or interpret the principles of operation of electronic symbols and block sections of schematic diagram
LO4.    Apply symptoms diagnosis and systematic pre-testing procedures
LO5.    Troubleshoot, repair and maintain audio/video products and systems
A.  INTRODUCTION:
This module is designed to enhance the knowledge, skills and attitude of the trainees in maintaining and repairing audio/ video products and systems.
B. LEARNING ACTIVITIES
LO 1:   ENUMERATE, EXPLAIN AND APPLY OHS POLICIES AND PROCEDURES IN MAINTAINING AND REPAIRING AUDIO/VIDEO PRODUCTS AND SYSTEMS
Learning Content
Methods
Presentation
Practice
Feedback
Resources
Time

1.   Work safety requirements
·         Self paced
·         Lecture/discussion
·         View Film

·          Read information Sheet 3.1-1 ( work safety requirements
·         Multimedia Presentation
·         Film Viewing

·         Self Check
·         Refer to answer key

·          CBLM
·          Multimedia
·          Audio/Video equipment



2.   Application of 5S
·          Self-paced instructions
·          Film viewing
·          Role Playing
·          View film
·          Re demonstration
·          Self Check
·          Oral Questioning and Interview
·          Refer to answer key
CBLM

3.   Handling and disposal of chemicals
·          Self-paced instructions
·          Film Viewing
·         Demonstration
·          Read Information Sheet
·          View Film
·         Demonstration
·          Self Check
·         Return Demo
·          Refer to answer key
·          Oral Questioning and Interview


4.   Hazardous and risk assessment mechanisms
·         Lecture/discussion
·         Film Viewing
·         Actual Demonstration
·         View film
·         Performance Test: Proper waste disposal
·         Return Demo
·          Clean surrounding/ Scoring rubrics
·          Interview
·          Oral questioning
Unused materials

5.   Isolation procedures
·         Demonstration
·         Film viewing
·         Actual Demonstration
·         View Film
·         Performance Test: Execute 5S
·         Return Demo

·         Clean surrounding/ Scoring rubrics
·         Oral interview andQuestioning
All available materials

6.   Use of protective equipment and clothing
·         Demonstration
·         Film Viewing
·          Demonstration
·          View Film
·          Performance Test: Wearing of Personal Protective Equipment (PPE)
·          Return Demo
·          Zero Accidents
·          Oral Questioning and Interview
Personal Protective Equipment (PPE) such as: face mask; globs and wrest raps.

7.   Use of codes of practice
·          Self paced
·          Lecture/discussion

·          Read Information Sheet (code of Practice)
·          Question and Answer

·          Self Check
·          True or False TEST
·          Refer to answer key
·          Discussion of answer
Industrial codes and practices

8.   Philippine electrical/electronics code
·         Lecture/discussion
·         Self-faced Instruction
·         Question and Answer
·         Read Information Sheet (Philippine Electrical/ Electronics Code)
True or False TEST
Discussion of answer
Philippine electrical/electronics code


C. ASSESSMENT PLAN
  • Written Test : True or False; Essay Types;
  • Performance Test: Performance test
D. TEACHER’S SELF-REFLECTION OF THE SESSION:


Plan Training Session




   Sector           :                ELECTRONICS


  Qualification Title:       Consumer Electronics Servicing NC-2

  Unit of Competency:   Maintain and repair electronically controlled domestic appliances


  Module Title:   Maintaining and repairing electronically controlled domestic appliances

  Submitted by:                G-one T. Paisones


Data Gathering Instrument for Trainee’s Characteristics
Please answer the following instrument according to the characteristics described below.  Encircle the letter of your choice that best describes you as a learner.  Blank spaces are provided for some data that need your response.
Characteristics of learners
Language, literacy and numeracy (LL&N)
Average grade in:
English
a.      95 and above
b.      90 to 94
c.       85 to 89
d.      80 to 84
e.      75 to 79
Average grade in:
Math
a.      95 and above
b.      90 to 94
c.       85 to 89
d.      80 to 84
e.      75 to 79
Cultural and language background
Ethnicity/culture:
a.      Bol-anon (Bohol)
b.      Subanin
c.       Maranao
d.      Cebuano
e.      Tagalog
f.        Gali
g.      Others( please specify)_____________
Education & general knowledge
Highest Educational Attainment:
a.      High School Level
b.      High School Graduate
c.       College Level
d.      College Graduate
e.      with units in Master’s degree
f.        Masteral Graduate
g.      With units in Doctoral Level
h.      Doctoral Graduate
Sex
a.      Male
b.      Female
Age
Your age: _____
Physical Illness/Disabilities
1.      Disabilities(if any)_____________________
2.      Existing Health Conditions (Existing illness if any)
a.      Asthma
b.      Heart disease
c.       Anemia
d.      Hypertension
e.      Diabetes
f.        Others(please specify) ________________
3. None
Previous technical certificates

Technical certificates:
1. _____________________________
2. _____________________________
3. _____________________________
4. _____________________________
5. _____________________________
Previous technical training experience
List down trainings related to technical training
1. _____________________________
2. _____________________________
3. _____________________________
4. _____________________________
5. _____________________________
Training Level completed
National Certificates acquired and NC level
1. _____________________________
2. _____________________________
3. _____________________________
4. _____________________________
5. _____________________________
Special courses
Other courses related to Technical Education
  1. Vocational Course
  2. Industry/Company Training
  3. Units in education
  4. Master’s degree units in education
  5. Others(please specify) _________________________
Learning styles
  1. Visual - The visual learner takes mental pictures of information given, so in order for this kind of learner to retain information, oral or written, presentations of new information must contain diagrams and drawings, preferably in color. The visual learner can't concentrate with a lot of activity around him and will focus better and learn faster in a quiet study environment.
  2. Kinesthetic - described as the students in the classroom, who have problems sitting still and who often bounce their legs while tapping their fingers on the desks. They are often referred to as hyperactive students with concentration issues.
  3. Auditory- a learner who has the ability to remember speeches and lectures in detail but has a hard time with written text. Having to read long texts is pointless and will not be retained by the auditory learner unless it is read aloud.
  4. Activist - Learns by having a go
  5. Reflector - Learns most from activities where they can watch, listen and then review what has happened.
  6. Theorist - Learns most when ideas are linked to existing theories and concepts.
  7. Pragmatist - Learns most from learning activities that are directly relevant to their situation.
Other needs
  1. Computer
  2. Financially challenged
  3. Working student
  4. Solo parent
  5. Others(please specify) ___________________________
















FORM 1.1 SELF-ASSESSMENT CHECK

INSTRUCTIONS:  This Self-Check Instrument will give the trainer necessary data or information which is essential in planning training sessions.  Please check the appropriate box of your answer to the questions below.
BASIC COMPETENCIES


CAN I…?
YES
NO
1.        Participating in workplace communication
1.1  Obtain and convey workplace   information


1.2  Complete relevant work-related documents


         1.3  Participate in workplace meeting and discussion


2.        Working in a team environment
2.1  Describe and identify team role and responsibility


         2.2  Describe work as a team member


3.       Practicing career professionalism
3.1  Integrate personal objectives with organizational goals.


3.2  Set and meet work priorities.


         3.3  Maintain professional growth and development.


4.       Practicing occupational health and safety procedures
4.1  Identify hazards and risks.


4.2  Evaluate hazards and risks.


4.3  Control hazards and risks.


          4.4  Maintain occupational health and safety awareness.















FORM 1.1 SELF-ASSESSMENT CHECK

INSTRUCTIONS:  This Self-Check Instrument will give the trainer necessary data or information which is essential in planning training sessions.  Please check the appropriate box of your answer to the questions below.
Common COMPETENCIES


CAN I…?
YES
NO
1.  Use hand tools
1.1  Plan and prepare for task to be undertaken


1.2  Prepare hand tools


1.3  Use appropriate hand tools and equipment


1.4  Maintain hand tools


2.  Perform mensuration and calculation
2.1  Select measuring instruments


2.2  Carry out measurement and calculation


2.3  Maintain measuring instruments


3. Prepare and interpret technical drawings
3.1  Identify different kinds of technical drawings


3.2  Interpret technical drawing


3.3  Prepare/make changes on electrical/electronic schematic and drawings


4. Apply quality standards
4.1  Assess quality or received materials


4.2  Assess own work


4.3  Engage in quality improvement


5. Perform computer operations
5.1  Plan and prepare for tasks to be taken/undertaken


5.2  Input data into computer


5.3  Assess information using computer


5.4  Produce output/data using computer system


5.5 Use basic functions of a web browser to locate information


5.6  Maintain computer equipment and systems


6. Terminate and connect electrical wiring and electronics circuit
6.1  Plan and prepare for termination/ connection of electrical wiring/electronic circuits


6.2  Terminate/connect wiring/electronic circuits


6.3  Test termination/connections of electrical wiring and electronics circuits





























FORM 1.1 SELF-ASSESSMENT CHECK

INSTRUCTIONS:  Please check the appropriate box of your answer to the questions below.
CORE COMPETENCIES


CAN I…?
YES
NO
1.        ASSEMBLE AND DISASSEMBLE CONSUMER ELECTRONIC PRODUCTS AND SYSTEMS
1.1 Enumerate, explain and apply OHS policies and procedures in assembling and disassembling consumer electronics products and systems


1.2 Identify and explain the uses/functions of different types of tools, equipment and testing instruments


1.3 Identify electronic symbols and interpret schematic diagrams and parts list


1.4 Apply proper soldering and de-soldering techniques


1.5 Apply wiring and cabling techniques


1.6 Apply assembling and disassembling techniques


1.7 Perform systematic inspection and apply specific testing procedures


2.        MAINTAIN AND REPAIR AUDIO/VIDEO PRODUCTS AND SYSTEMS
2.1 Enumerate, explain and apply OHS policies and procedures in maintaining and repairing audio/video products and systems


2.2 Identify and explain the uses/functions of different types of tools and testing instruments for maintaining and repairing audio/video products and systems


2.3 Identify and explain or interpret the principles of operation of electronic symbols and block sections of schematic diagram


2.4 Apply symptoms diagnosis and systematic pre-testing procedures


2.5 Troubleshoot, repair and maintain audio/video products and systems


3.       MAINTAIN AND REPAIR ELECTRONICALLY CONTROLLED DOMESTIC APPLIANCES
3.1 Enumerate, explain and apply OHS policies and procedures in maintaining and repairing electronically controlled domestic appliances


3.2 Identify and explain the uses/functions of different types of tools and testing instruments for maintaining and repairing electronically controlled domestic appliances


3.3 Identify and explain or interpret the principles of operation of electronic symbols and block sections of schematic diagram


3.4 Apply symptoms diagnosis and systematic pre-testing procedures


3.5 Troubleshoot, repair and maintain electronically controlled domestic appliances


3.6 Enumerate, explain and apply OHS policies and procedures in maintaining and repairing electronically controlled domestic appliances


4.       MAINTAIN AND REPAIR CELLULAR PHONE UNIT
4.1  Enumerate, explain and apply OHS policies and procedures in maintaining and repairing a cellular phone unit


4.2  Identify and explain the uses/functions of different types of tools and testing instruments for maintaining and repairing a cellular phone unit


4.3  Identify and explain or interpret the principles of operation of electronic symbols and block sections of schematic diagram


4.4  Apply symptoms diagnosis and systematic pre-testing procedures


4.5  Repair, maintain and enhance cellular phone unit


























CHECKED
FORM 1.1 SELF-ASSESSMENT CHECK

INSTRUCTIONS:  Please check the appropriate box of your answer to the questions below.
CORE COMPETENCIES


CAN I…?
YES
NO
1. ASSEMBLE AND DISASSEMBLE CONSUMER ELECTRONIC PRODUCTS AND SYSTEMS
1.1 Enumerate, explain and apply OHS policies and procedures in assembling and disassembling consumer electronics products and systems

1.2 Identify and explain the uses/functions of different types of tools, equipment and testing instruments

1.3 Identify electronic symbols and interpret schematic diagrams and parts list

1.4 Apply proper soldering and de-soldering techniques

1.5 Apply wiring and cabling techniques

1.6 Apply assembling and disassembling techniques

1.7 Perform systematic inspection and apply specific testing procedures

2.  MAINTAIN AND REPAIR AUDIO/VIDEO PRODUCTS AND SYSTEMS
2.1 Enumerate, explain and apply OHS policies and procedures in maintaining and repairing audio/video products and systems

2.2 Identify and explain the uses/functions of different types of tools and testing instruments for maintaining and repairing audio/video products and systems

2.3 Identify and explain or interpret the principles of operation of electronic symbols and block sections of schematic diagram

2.4 Apply symptoms diagnosis and systematic pre-testing procedures

2.5 Troubleshoot, repair and maintain audio/video products and systems

3. MAINTAIN AND REPAIR ELECTRONICALLY CONTROLLED DOMESTIC APPLIANCES
3.1 Enumerate, explain and apply OHS policies and procedures in maintaining and repairing electronically controlled domestic appliances

3.2 Identify and explain the uses/functions of different types of tools and testing instruments for maintaining and repairing electronically controlled domestic appliances

3.3 Identify and explain or interpret the principles of operation of electronic symbols and block sections of schematic diagram

3.4 Apply symptoms diagnosis and systematic pre-testing procedures

3.5 Troubleshoot, repair and maintain electronically controlled domestic appliances

3.6 Enumerate, explain and apply OHS policies and procedures in maintaining and repairing electronically controlled domestic appliances

4. MAINTAIN AND REPAIR CELLULAR PHONE UNIT
4.1  Enumerate, explain and apply OHS policies and procedures in maintaining and repairing a cellular phone unit

4.2  Identify and explain the uses/functions of different types of tools and testing instruments for maintaining and repairing a cellular phone unit

4.3  Identify and explain or interpret the principles of operation of electronic symbols and block sections of schematic diagram

4.4  Apply symptoms diagnosis and systematic pre-testing procedures

4.5  Repair, maintain and enhance cellular phone unit






















Evidences/Proof of Current Competencies

Form 1.2:    Evidence of Current Competencies acquired related to Job/Occupation

Current competencies
Proof/Evidence
Means of validating
ASSEMBLE AND DISASSEMBLE CONSUMER ELECTRONIC PRODUCTS AND SYSTEMS
Certificates from the employer (authenticated)
Demonstration
MAINTAIN AND REPAIR AUDIO/VIDEO PRODUCTS AND SYSTEMS
Certificate of Merit from Skills Competition
Video and pictures of actual skills competition























Form 1.3 Summary of Current Competencies Versus Required Competencies

Current Competencies
Current Competencies
Training Gaps/Requirements
Assemble/ disassemble consumer electronics products and systems
Assemble/ disassemble consumer electronics products and systems

Maintain and repair audio/ video products and systems

Maintain and repair audio/ video products and systems
Maintain and repair electronically- controlled domestic appliances
Enumerate, explain and apply OHS policies and procedures in maintaining and repairing electronically controlled domestic appliances

Enumerate, explain and apply OHS policies and procedures in maintaining and repairing electronically controlled domestic appliances
Identify and explain the uses/functions of different types of tools and testing instruments for maintaining and repairing electronically controlled domestic appliances

Identify and explain the uses/functions of different types of tools and testing instruments for maintaining and repairing electronically controlled domestic appliances
Identify and explain or interpret the principles of operation of electronic symbols and block sections of schematic diagram

Identify and explain or interpret the principles of operation of electronic symbols and block sections of schematic diagram
Apply symptoms diagnosis and systematic pre-testing procedures

Apply symptoms diagnosis and systematic pre-testing procedures
Troubleshoot, repair and maintain electronically controlled domestic appliances

Troubleshoot, repair and maintain electronically controlled domestic appliances
Enumerate, explain and apply OHS policies and procedures in maintaining and repairing electronically controlled domestic appliances

Enumerate, explain and apply OHS policies and procedures in maintaining and repairing electronically controlled domestic appliances
Maintain and repair cellular phones
4.1  Enumerate, explain and apply OHS policies and procedures in maintaining and repairing a cellular phone unit

 Enumerate, explain and apply OHS policies and procedures in maintaining and repairing a cellular phone unit
4.2  Identify and explain the uses/functions of different types of tools and testing instruments for maintaining and repairing a cellular phone unit

  Identify and explain the uses/functions of different types of tools and testing instruments for maintaining and repairing a cellular phone unit
4.3  Identify and explain or interpret the principles of operation of electronic symbols and block sections of schematic diagram

  Identify and explain or interpret the principles of operation of electronic symbols and block sections of schematic diagram
4.4  Apply symptoms diagnosis and systematic pre-testing procedures

  Apply symptoms diagnosis and systematic pre-testing procedures
4.5  Repair, maintain and enhance cellular phone unit

  Repair, maintain and enhance cellular phone unit
























Form No. 1.4: Training Needs

Training Needs
(Learning Outcomes)
Module Title/Module of Instruction
Enumerate, explain and apply OHS policies and procedures in maintaining and repairing electronically controlled domestic appliances
Maintain and repair electronically- controlled domestic appliances
Identify and explain the uses/functions of different types of tools and testing instruments for maintaining and repairing electronically controlled domestic appliances
Identify and explain or interpret the principles of operation of electronic symbols and block sections of schematic diagram
Apply symptoms diagnosis and systematic pre-testing procedures
Troubleshoot, repair and maintain electronically controlled domestic appliances
Enumerate, explain and apply OHS policies and procedures in maintaining and repairing a cellular phone unit
Maintain and repair cellular phones
Identify and explain the uses/functions of different types of tools and testing instruments for maintaining and repairing a cellular phone unit
Identify and explain or interpret the principles of operation of electronic symbols and block sections of schematic diagram
Apply symptoms diagnosis and systematic pre-testing procedures
Repair, maintain and enhance cellular phone unit










(Consumer Electronics Servicing NC-2)
           

No.
Unit of Competency
Module Title
Code
1.
1.   Assemble/ disassemble consumer electronics products and systems

1.1  Assembling/ disassembling consumer electronics products and systems


ELC724322
2.
2.   Maintain and repair audio/ video products and systems

2.1  Maintaining and repairing audio/ video products and systems

ELC724323
3.
3.   Maintain and repair electronically- controlled domestic appliances

3.1  Maintaining and repairing electronically- controlled domestic appliances

ELC724324
4.
4.   Maintain and repair cellular phones
4.1 Maintaining and repairing cellular phones


ELC724325














UNIT OF COMPETENCY: Maintain and Repair Audio/ Video Products and Systems


MODULE TITLE:          Maintaining and Repairing Audio/ Video Products and Systems                       
                       
MODULE DESCRIPTOR: This module is designed to enhance the knowledge, skills and attitude of the trainees in maintaining and repairing audio/ video products and systems.

NOMINAL DURATION:  200 hours

LEARNING OUTCOMES: 
 At the end of this module you MUST be able to:
1.  Enumerate, explain and apply OHS policies and procedures in maintaining and repairing audio/video products and systems

2. Identify and explain the uses/functions of different types of tools and testing instruments for maintaining and repairing audio/video products and systems

3. Identify and explain or interpret the principles of operation of electronic symbols and block sections of schematic diagram

4. Apply symptoms diagnosis and systematic pre-testing procedures

5. Troubleshoot, repair and maintain audio/video products and systems

ASSESSMENT CRITERIA:
1.            Electrical safety precautions are identified, enumerated and explained correctly
2.           OHS in maintaining and repairing audio/video products and systems are defined and explained
3.           OHS in maintaining and assembling audio/video products and systems are demonstrated in accordance to the set procedures/instructions
4.            Materials needed for maintenance and repair are identified and prepared and checked according to the work instructions
5.           Tools and equipment types and functions needed for maintenance and repair are identified and demonstrated according to set standards
6.           Testing devices and instruments operations needed for maintenance and repair are explained and demonstrated according to instruction manual
7.           Personal protective equipment are used in accordance with the Occupational Health and Safety guidelines and policies
8.            Electronic symbols are identified and selected according to the schematic diagram
9.           Electronic parts value are read and matched correctly as required
10.           Schematic diagram sections and functions are identified and explained
11.            Personal protective equipment are used in accordance with occupational health and safety practices
12.           Control settings/adjustments are checked in conformity with service-manual specifications.
13.           System defects/Fault symptoms are diagnosed and identified using appropriate tools and equipment and in accordance with safety procedures
14.           Identified defects and faults are explained to the responsible person in accordance with enterprise or company policy and procedures
15.           Customers are advised/informed regarding the status and serviceability of the unit
16.           Results of diagnosis and testing are documented accurately and completely within the specified time
17.            Materials, tools and instruments needed in troubleshooting repair and cleaning are selected and checked in accordance with established procedures
18.           Isolation of troubles are performed with proper Personal Protective Equipment PPE) and following the Occupational Health and Safety (OHS) practices
19.           Troubles are isolated by following the systematic procedures and using proper instruments in accordance with the prescribed instructions
20.           Defective parts/components are replaced with identical or recommended appropriate equivalent ratings and soldered/mounted in accordance with the current industry standards
21.           Control settings/adjustments of repaired unit are performed in conformity with service-manual specifications
22.           Cleaning of unit is performed in accordance with standard procedures
23.           Periodical tests of the repaired unit are maintained and documented according to standard procedures
24.           Repaired units are reassembled completely and waste materials are disposed of in accordance with environmental requirements
25.           Results of troubleshooting and repair are documented properly within the specified time






LEARNING OUTCOME NO. 1
“ENUMERATE, EXPLAIN AND APPLY OHS POLICIES AND PROCEDURES IN MAINTAINING AND REPAIRING AUDIO/VIDEO PRODUCTS AND SYSTEMS”

Contents:
·         Work safety requirements
·         Application of 5S
·         Handling and disposal of chemicals
·         Hazardous and risk assessment mechanisms
·         Isolation procedures
·         Use of protective equipment and clothing
·         Use of codes of practice
·         Philippine electrical/electronics code

Assessment Criteria
1.      Electrical safety precautions are identified, enumerated and explained correctly
2.      OHS in maintaining and repairing audio/video products and systems are defined and explained
3.      OHS in maintaining and assembling audio/video products and systems are demonstrated in accordance to the set procedures/instructions

Conditions
The participants will have access to:
·         Learning elements and manuals
·         Working area/bench
·         PPE

Assessment Method:
  1.  Written test
  2.  Performance Test








Learning Outcome 1
“ENUMERATE, EXPLAIN AND APPLY OHS POLICIES AND PROCEDURES IN MAINTAINING AND REPAIRING AUDIO/VIDEO PRODUCTS AND SYSTEMS”

Learning Activities
Special Instructions
Electrical safety precautions are identified, enumerated and explained correctly
§  Individual performance testing
§  Execute industrial housekeeping (5S)
§  Continuous Improvement (KAIZEN)
§  Absolutely NO Horse Playing

OHS in maintaining and repairing audio/video products and systems are defined and explained
OHS in maintaining and assembling audio/video products and systems are demonstrated in accordance to the set procedures/instructions












CRITERIA
Did you….
YES
NO
Electrical safety precautions are identified, enumerated and explained correctly


OHS in maintaining and repairing audio/video products and systems are defined and explained


OHS in maintaining and assembling audio/video products and systems are demonstrated in accordance to the set procedures/instructions


Materials needed for maintenance and repair are identified and prepared and checked according to the work instructions


Tools and equipment types and functions needed for maintenance and repair are identified and demonstrated according to set standards


Testing devices and instruments operations needed for maintenance and repair are explained and demonstrated according to instruction manual


Personal protective equipment are used in accordance with the Occupational Health and Safety guidelines and policies


Electronic symbols are identified and selected according to the schematic diagram


Electronic parts value are read and matched correctly as required


Schematic diagram sections and functions are identified and explained


Personal protective equipment are used in accordance with occupational health and safety practices


Control settings/adjustments are checked in conformity with service-manual specifications.


System defects/Fault symptoms are diagnosed and identified using appropriate tools and equipment and in accordance with safety procedures


Identified defects and faults are explained to the responsible person in accordance with enterprise or company policy and procedures


Customers are advised/informed regarding the status and serviceability of the unit


Results of diagnosis and testing are documented accurately and completely within the specified time


Materials, tools and instruments needed in troubleshooting repair and cleaning are selected and checked in accordance with established procedures


Isolation of troubles are performed with proper Personal Protective Equipment PPE) and following the Occupational Health and Safety (OHS) practices


Troubles are isolated by following the systematic procedures and using proper instruments in accordance with the prescribed instructions


Defective parts/components are replaced with identical or recommended appropriate equivalent ratings and soldered/mounted in accordance with the current industry standards


Control settings/adjustments of repaired unit are performed in conformity with service-manual specifications



Evidence Plan

Competency standard:
Consumer Electronics Servicing NC-2
Unit of competency:
Maintain and Repair Audio/ Video Products and Systems
Ways in which evidence will be collected:
[tick the column]
Observation & Questioning
Demonstration & Questioning
Third party Report
Portfolio
Written
The evidence must show that the trainee…
Electrical safety precautions are identified, enumerated and explained correctly





OHS in maintaining and repairing audio/video products and systems are defined and explained





OHS in maintaining and assembling audio/video products and systems are demonstrated in accordance to the set procedures/instructions





Materials needed for maintenance and repair are identified and prepared and checked according to the work instructions





Tools and equipment types and functions needed for maintenance and repair are identified and demonstrated according to set standards





Testing devices and instruments operations needed for maintenance and repair are explained and demonstrated according to instruction manual





Personal protective equipment are used in accordance with the Occupational Health and Safety guidelines and policies





Electronic symbols are identified and selected according to the schematic diagram





Electronic parts value are read and matched correctly as required





Schematic diagram sections and functions are identified and explained





Personal protective equipment are used in accordance with occupational health and safety practices





Control settings/adjustments are checked in conformity with service-manual specifications.





System defects/Fault symptoms are diagnosed and identified using appropriate tools and equipment and in accordance with safety procedures





Identified defects and faults are explained to the responsible person in accordance with enterprise or company policy and procedures





Customers are advised/informed regarding the status and serviceability of the unit





Results of diagnosis and testing are documented accurately and completely within the specified time





Materials, tools and instruments needed in troubleshooting repair and cleaning are selected and checked in accordance with established procedures





Isolation of troubles are performed with proper Personal Protective Equipment PPE) and following the Occupational Health and Safety (OHS) practices





Troubles are isolated by following the systematic procedures and using proper instruments in accordance with the prescribed instructions





Defective parts/components are replaced with identical or recommended appropriate equivalent ratings and soldered/mounted in accordance with the current industry standards





Control settings/adjustments of repaired unit are performed in conformity with service-manual specifications





NOTE:  *Critical aspects of competency



TABLE OF SPECIFICATION

Objectives/Content area/Topics
Knowledge
Comprehension
Application
# of items/
% of test
 Work safety requirements
10
10/8%
 5s and PPE
5
10
15/12%
 Parts of TV
25
10
35/28%
 TV Troubleshooting
16
16/12.8%
 Acronyms in Television System
20
20/ 16%
Parts of Microwave Oven
7


7/ 5.6%
Microwave Oven Troubleshooting


7
7/ 5.6%
Locating of Parts of TV


15
15/ 12%
TOTAL
67/ 53.6%
20 / 16%
38/ 30.4%
125/100%











QUESTIONING TOOL

Questions to probe the candidate’s underpinning knowledge

Satisfactory response

Extension/Reflection Questions

Yes

No

1.  What if your TV is dead set; what are the possible defects regarding dead set?
q   
q   
2.  What should you do when there is no TV horizontal display?
q   
q   
3.  What should you do when you are about to measure current and the only measuring device you have is an ohmmeter?
q   
q   
4.  Did you tell to your customer about the particular component that needed to replace and its exact price?
q   
q   

Safety Questions

 

 

5.  What is the impact of Electro Static Discharge to the component?
q   
q   
6.  Why should wear safety goggle during soldering SMD components?
q   
q   
7.  Did you continue your work (repair and troubleshooting) if you have no safety personal equipment?
q   
q   
8.  Why is safety needed in the electronics laboratory?
q   
q   

Contingency Questions

 

 

9.  How do you advice your client regarding choosing Digital Flat TV compare to the Analog TV?
q   
q   
10.  What are the disadvantages in buying surplus TV?
q   
q   
11.  What is your first step with regard in troubleshooting and repair consumer electronic devices?
q   
q   
12.  How do you manage to practice despite of short number of equipment and large number of enrolees in this course?
q   
q   
Job Role/Environment Questions
q   
q   
13.  What are your duties in keeping your laboratory/industry safe and clean?
q   
q   
14.  How do you describe your responsibility as a student in keeping your devices, equipment and materials maintain to their normal operation?
q   
q   
15.  How important is this course (Consumer Electronic Servicing) in your life?
q   
q   
16.  How do you define the electronic technician?
q   
q   
Rules and Regulations
q   
q   
17.  Safety glasses, goggles, face shield, and shoes (no sandals) must be worn at all times.
q   
q   
18.  Work is NOT permitted in the laboratory outside of the designated laboratory hours
q   
q   
19.  Keep your work space clean and tidy. The working space, desk drawers, cabinets, and
instruments must be kept neat and clean at all times
q   
q   
20.  Use common sense and do not rush in the laboratory.
q   
q   
The candidate’s underpinning knowledge was:
q  Satisfactory
q  Not Satisfactory

Templates for Inventory of Training Resources
Resources for presenting instruction

  • Print Resources
As per TR
As per Inventory
Remarks
CBLM



BOOKS



Laboratory Manuals



  • Non Print Resources
As per TR
As per Inventory
Remarks
CD



      EBOOKs



INTERNET



Multi Media




Resources for Skills practice of Competency #1 ______________________________
  • Supplies and Materials
As per TR
As per Inventory
Remarks
·         Cleaning brush



·         Lead free solder



·         Resin core solder



·         Wire stranded, #22, different colors)



·         Silicon grease



·         Resistors (different values)



·         Capacitors (different values)



·         Transformer



·         Learning materials



·         Books and references



·         Technical manuals



  • Tools
As per TR
As per Inventory
Remarks
·         Long-nosed pliers



·         Diagonal cutters



·         Standard screwdrivers



·         Soldering iron



·         Desoldering iron, 30W



·         Screwdriver, assorted, Phillips, slotted



·         Wire Wrenches, assorted



·         Allen key wrench



·         Utility knife, stripper



·         Test jig



  • Equipment
As per TR
As per Inventory
Remarks
·         Oscilloscope



·         Function generator



·         Electronically controlled unit(s)/appliance(s) and accessories



·         Audio unit(s) and accessories



·         Video unit(s) and accessories



·         Cell phone unit(s) and accessories



·         ESD free work bench with mirror Back-to-back/ one sided



·         High grade magnifying glass with lamp



·         TV pattern generator



·         High voltage probe




Note:  In the remarks section, remarks may include for repair, for replenishment, for reproduction, for maintenance etc.